Advanced Air Bag

SDM Inspection

Reference: SDM Removal and Installation:Advanced Air Bag

WARNING: During service procedures, be very careful when handling a Sensing and Diagnostic Module (SDM). Be sure to read Precautions on Service and Diagnosis of Air Bag System:Advanced Air Bag before starting to work and observe every precaution during work. Neglecting them may result in personal injury or inactivation of the air bag system when necessary.

CAUTION:
^ Do not connect a tester whatever type it may be.
^ Never repair or disassemble SDM.
^ If SDM has been dropped, it should be replaced.

If any faulty condition is found in the following checks, replace.
^ Check SDM for dents, cracks or deformation.
^ Check SDM connector for damage, cracks or lock mechanism.
^ Check SDM terminal for bend, corrosion or rust.