LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Reno Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System >> Repair Instructions >> Driver Airbag Module Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Driver Airbag Module Removal and Installation: Removal

  1. Disconnect the negative battery cable.
  2. Remove the audio control switch. Refer to AUDIO REMOTE CONTROL SWITCH REMOVAL AND INSTALLATION .
  3. Remove the cruise control switch. Refer to CRUISE CONTROL SWITCH REMOVAL AND INSTALLATION .
  4. Remove two driver airbag module mounting bolts and discard them.
  5. Remove the connectors from the driver airbag module.
  6. Remove the driver airbag module.
    Fig 1: Identifying Driver Airbag Module Mounting Bolt
    G04817490Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals