LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Reno Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission) >> Repair Instruction >> Valve Body Disassembly and Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Valve Body Disassembly and Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the oil pan bolts and oil pan.
  2. Remove the oil pan gasket.
    Fig 1: Identifying Oil Pan Bolts
    G04717314Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove valve body fixing bolts and transaxle input speed sensor bolt on the valve body.
  4. Remove the holder for the transaxle input speed sensor.
    Fig 2: Identifying Valve Body Fixing Bolts
    G04717315Courtesy of SUZUKI OF AMERICA CORP.
  5. Tilt the valve body.
  6. Remove the fastening screw for the output speed sensor under the valve body assembly.
  7. Lever the cable out of the retaining clip and pull out the output speed sensor.
  8. Installation should follow the removal procedure in the reverse order.
    Fig 3: Identifying Valve Body Fixing Bolts
    G04717316Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals