Park/Neutral Start Switch Removal and Installation: Installation

WARNING: This page is about a different variant/trim than selected.

Tools Required:

DW260-050 Park/Neutral Switch Installer

Install the park/neutral start switch.
Tighten:

Tighten the park/neutral start switch bolts to 10 N.m (89 lb-in).
Adjust the park/neutral switch using the Park/Neutral switch installer DW260-050.

Fig 1: Identifying Park/Neutral Switch Installer DW260-050
Courtesy of SUZUKI OF AMERICA CORP.
Install the shift lever and the shift lever nut.
Tighten:

Tighten the shift lever nut to 10 N.m (89 lb-in).

Fig 2: Identifying Shift Lever Nut
Courtesy of SUZUKI OF AMERICA CORP.
Connect the shift control cable and the retaining clip.
Connect the park/neutral position switch electrical connector.
Connect the negative battery cable.

Fig 3: Identifying Shift Control Cable And Retaining Clip
Courtesy of SUZUKI OF AMERICA CORP.