LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Reno Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission) >> Diagnostic Information and Procedures >> Transaxle Fluid Level Service >> Methods for Locating Leaks >> Powder Method
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powder Method

WARNING: This page is about a different variant/trim than selected.
  1. Thoroughly clean the suspected leak area.
  2. Apply an aerosol type powder (foot powder) to the suspected leak area.
  3. Drive the vehicle for approximately 25 km (15 miles) or until the transaxle reaches normal operating temperature 88 °C (190 °F).
  4. Turn the engine OFF.
  5. Inspect the suspected leak area and trace the leak path through the powder to find the source of the leak.
  6. Make the necessary repairs.
scientia non olet · About LEMON Manuals