Circuit Description
WARNING: This page is about a different variant/trim than selected.
The vehicle A/T OSS is a magnetic inductive pickup that relays information relative to vehicle speed to the TCM.
Vehicle speed information is used by the TCM to control shift timing, line pressure, and TCC apply and release.
The output speed sensor mounts in the case at the speed sensor rotor, which is pressed onto the spur gear. An air gap of 0.1 - 1.3 mm (0.004 - 0.05 in.) is maintained between the sensor and the teeth on the spur gear teeth. The sensor consists of a permanent magnet surrounded by a coil of wire. As the differential rotates, an AC signal induces a higher frequency and voltage measurement at the sensor. Sensor resistance should measure ∞Ω at 20 °C (68 °F). Sensor can measure from 20 - 8,000 Hz.