Power Window Regulator Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

Install the window regulator with the nuts.
Tighten:

Tighten the window regulator nuts to 10 N.m (89 lb-in.).
Connect the electrical connector.
Install the door glass. Refer to Front Door Glass Installation .
Connect the negative battery cable.

Fig 1: Identifying Power Window Regulator With Nuts
Courtesy of SUZUKI OF AMERICA CORP.