Front Door Step Lamp Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Connect the electrical connector.
Install the replacement front door step lamp bulb.
Install the lower half of the door trim panel to its original position.
Tighten:

Tighten the front door trim panel screws to 3.5 N.m (31 lb-in.).

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
Install the front door step lamp lens cover.
Connect the negative battery cable.

Fig 1: Identifying Front Door Step Lamp Lens Cover
Courtesy of SUZUKI OF AMERICA CORP.