LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Reno Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Lighting Systems) >> Repair Instructions >> Fog Lamps Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fog Lamps Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the bulb electrical connector.
  2. Install the bulb from the fog lamp assembly.
  3. Install the retaining wire.
  4. Install fog lamp access cover with the screws.
    Fig 1: Identifying Fog Lamp Access Cover
    G04720326Courtesy of SUZUKI OF AMERICA CORP.
  5. Connect the fog lamp assembly electrical connector.
    CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
  6. Install the fog lamp assembly.
  7. Install the fog lamp assembly with the nuts.

    Tighten: 

    Tighten the fog lamp assembly nuts to 3 N.m (27 lb-in.).

  8. Connect the negative battery cable.
    Fig 2: Identifying Fog Lamp Assembly And Nuts
    G04720325Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals