Tightening Torque Specifications
WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lb-ft | |
| Brake pipe flare nut for M10 | 16 | 1.6 | 11.5 |
| Brake pipe flare nut for M12 | 19 | 1.9 | 14.0 |
| ABS hydraulic unit / control module assembly bolt | 9 | 0.9 | 6.5 |
| ABS hydraulic unit / control module assembly bracket bolt | 26 | 2.6 | 19.0 |
| Front wheel speed sensor bolt | 11 | 1.1 | 8.0 |
| Front wheel speed sensor harness clamp bolt | 11 | 1.1 | 8.0 |
| Rear wheel speed sensor bolt | 11 | 1.1 | 8.0 |
| G sensor bolt | 3.0 | 0.3 | 2.2 |
NOTE:
The specified tightening torque is also described in the following.
ABS (ESP®) HYDRAULIC UNIT / CONTROL MODULE ASSEMBLY COMPONENTS
ABS (ESP®) HYDRAULIC UNIT / CONTROL MODULE ASSEMBLY COMPONENTS
Reference:
For the tightening torque of fastener not specified in this article, refer to FASTENERS INFORMATION .