For 2WD model
WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
Before inspecting rear wheel speed sensor encoder, remove rear wheel speed sensor referring to REAR WHEEL SPEED SENSOR REMOVAL AND INSTALLATION (2WD MODEL) .
- Check encoder (1) for crack, damage or deformation.
- Turn wheel and check if encoder rotation is free from eccentricity and looseness.
- Check that no foreign material is attached.
If any faulty is found, clean or replace. Refer to REAR WHEEL HUB ASSEMBLY REMOVAL AND INSTALLATION (REAR DRUM BRAKE MODEL) .