G Sensor Removal and Installation (4WD Model): Installation

WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Reference: G SENSOR INSPECTION (4WD MODEL)

Install G sensor (1), and connect G sensor connector.
Tightening torque

G sensor bolt a: 3.0 N.m (0.3 kg-m, 2.2 lb-ft)

Fig 1: Identifying G Sensor Bolts (a)
Courtesy of SUZUKI OF AMERICA CORP.
Install center console box.
Connect negative cable to battery.