LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Reno Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (Brakes - Abs) >> Diagnostic Information and Procedures >> DTC C1013: Control Module Mismatch >> Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC C1013: Control Module Mismatch: Troubleshooting

WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSIS PROCEDURE

Step Action YES NO
1 
  1. Disconnect ABS hydraulic unit / control module connector with ignition switch turned OFF.
  2. Turn ignition switch to ON position.
  3. Measure voltage between terminal of "E08-6" and vehicle body ground.

Is it 0.3 V or more? 		 "GRN/YEL" wire short to power source circuit. Substitute a known-good ABS hydraulic unit / control module assembly and recheck.
scientia non olet · About LEMON Manuals