DTC Clearance

WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Perform Steps 1 through 5 of DTC check procedure and have DTC indicated.
Open driver side door.
Close driver side door and within 10 seconds after that, perform Steps a to c described below.
1. Push unlock side (3) of driver side manual door lock switch (1).
2. Push lock side (2) of driver side manual door lock switch.
3. Repeat Steps a) and b) 3 times.
  At the end of Step c), DTCs are cleared and key indicator light indicates DTC No. 12 (Normal).
  
  Fig 1: Identifying Door Lock Switch
  Courtesy of SUZUKI OF AMERICA CORP.
After completing DTC clearance, remove ignition key from ignition key cylinder.