LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Reno Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Instrumentation/Driver Info./Horn) >> Repair Instructions >> Ignition Switch Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Switch Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative cable at battery.
  2. Confirm that ignition key is removed.
  3. Remove dash side trim (4) and steering column hole cover (1).
  4. Turn steering wheel to remove steering column cover screws (3) and then remove steering column covers (2).
    Fig 1: Identifying Steering Column Cover And Screws
    G04848918Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove steering column mounting nuts referring to Step 7) under "Removal" of STEERING COLUMN REMOVAL AND INSTALLATION .
  6. Disconnect couplers (1) from ignition switch (2).
  7. Remove ignition switch (2) from key cylinder (3).
    Fig 2: Identifying Ignition Switch And Key Cylinder
    G04848919Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals