Fuel Level Sensor Inspection
WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
Reference: FUEL LEVEL SENSOR REMOVAL AND INSTALLATION
- Check that resistance between terminals "a" and "b" of fuel level sensor changes with change of float position.
- Check resistance between terminals "a" and "b" at each float position in the following.
If the measured value is out of specification, replace.
Fuel level sensor specifications
FUEL LEVEL SENSOR SPECIFICATIONS
| Float Position | Resistance (O) | |
|---|---|---|
| Full Upper "c" | 194 mm (7.64 in.) | 40 ± 2 |
| Full Lower "d" | 23 mm (0.91 in.) | 280 ± 3.3 |