Combination Meter Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative (-) cable at battery.
Remove dash side trim (1) and steering column hole cover (2).

Fig 1: Identifying Dash Side Trim And Steering Column Hole Cover
Courtesy of SUZUKI OF AMERICA CORP.
Remove center ventilation louver referring to Step 1) and 2) of INFORMATION DISPLAY (CLOCK) REMOVAL AND INSTALLATION .
Remove combination meter cluster panel (1) pulling it in arrow direction shown in figure.

Fig 2: Identifying Combination Meter Cluster Panel
Courtesy of SUZUKI OF AMERICA CORP.
Remove screws (1) fastening combination meter.
Remove combination meter (2) pulling it arrow direction as shown.

Fig 3: Identifying Combination Meter
Courtesy of SUZUKI OF AMERICA CORP.