Security Alarm Mode Selection Procedure (If Equipped)

WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Reference: SECURITY ALARM DESCRIPTION (IF EQUIPPED)

Security alarm mode can be selected by performing the following procedure.

Confirm that all doors are closed, all doors are unlocked and ignition key is inserted in ignition key cylinder.
Remove ignition key from ignition key cylinder.
Perform step a through e described below within 15 seconds.
1. Insert ignition key (1) in ignition key cylinder (2).
2. Remove ignition key from ignition key cylinder.
3. Repeat step a and b twice.
4. Insert ignition key in ignition key cylinder.
5. Push lock side (3) of driver side manual lock switch (4) 3 times.
  
  Fig 1: Identifying Lock Switch & Lock
  Courtesy of SUZUKI OF AMERICA CORP.
When step 3 is completed, the mode changes to the next one automatically. The warning buzzer (located in BCM) sounds by the number of specified for each mode as follows.
- Changed from A mode to B mode: Buzzer sounds 4 times
- Changed from B mode to A mode: Buzzer sounds once