LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Reno Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (Immobilizer System) >> Diagnostic Information and Procedure >> DTC Clearance
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Clearance

WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: To know how to use SUZUKI scan tool in detail, refer to its operator's manual.
  1. Turn the ignition switch to OFF position,
  2. Connect SUZUKI scan tool to data link connector (DLC) (1) located under instrument panel at driver's seat side.

    Special Tool 

    (A): SUZUKI scan tool (SUZUKI-SDT) 

    Fig 1: Connecting SUZUKI Scan Tool To Data Link Connector
    G04849159Courtesy of SUZUKI OF AMERICA CORP.
  3. Turn the ignition switch to ON position.
  4. Clear DTC(s) according to the instructions displayed on SUZUKI scan tool.
  5. After completing the clearance, turn the ignition switch to OFF position, and then disconnect SUZUKI scan tool from DLC.
scientia non olet · About LEMON Manuals