Indicator Operation

WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

The 4WD control module outputs operation signal of the 4WD AUTO indicator and the 4WD LOCK indicator. Indicators as follows in order to inform what state the 4WD control system is.

INDICATOR OPERATION TABLE

Operation		Condition (when any one of the following conditions is satisfied)
Indicator
4WD AUTO indicator	OFF	Ignition switch is OFF. Vehicle is at "2WD" position or "4WD-lock" position.
	ON	Within 2 seconds after ignition switch is turn ON (checking indicator operation). Vehicle is at "4WD-auto" position. 4WD control module detects DTC of 4WD control system.
	Blinking at intervals of 2 seconds continuously	4WD control module detects the rotation difference of front wheel and rear wheel and/or temperature of transfer more than specified temperature.
4WD LOCK indicator	OFF	Ignition switch is OFF. Vehicle is at "2WD" position or "4WD-auto" position.
4WD LOCK indicator	ON	Within 2 seconds after ignition switch is turn ON (checking indicator operation). Vehicle is at "4WD-lock" position. 4WD control module detects DTC of 4WD control system.