Reduction Driven Gear Assembly Disassembly and Reassembly: Disassembly

WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Remove left bearing (1) and bevel gear (2) using special tool, bearing puller (3) and hydraulic press (4).
Special Tool

(A): 09925-98220

Fig 1: Pressing Out Left Bearing And Bevel Gear
Courtesy of SUZUKI OF AMERICA CORP.
In order to remove right bearing (1) from reduction driven gear (2), grind with a grinder (3) one part "a" of bearing as illustrated till it becomes thin.
CAUTION: Be careful not to grind too far not to damage reduction driven gear.

Fig 2: Identifying Right Bearing And Reduction Driven Gear
Courtesy of SUZUKI OF AMERICA CORP.
Break with a chisel (1) the thin ground bearing (2), and it can be removed.

Fig 3: Identifying Chisel And Thin Ground Bearing

Courtesy of SUZUKI OF AMERICA CORP.