LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Reno Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Automatic Transmission) >> Repair Instructions >> Input Shaft Speed Sensor Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input Shaft Speed Sensor Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove battery and battery tray.
  2. Disconnect input shaft speed sensor connector (2).
  3. Remove input shaft speed sensor (1) by removing its bolt.
    Fig 1: Identifying Input Shaft Speed Sensor
    G04847780Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals