A/T Fluid Change

WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Lift up vehicle.
When engine is cool, remove drain plug (1) from transaxle housing (2) and drain A/T fluid.
Install a new gasket to drain plug.
Install drain plug (1).
Tightening torque

A/T fluid drain plug a: 40 N.m (4.0 kg-m, 29.0 lb-ft)

Fig 1: Identifying Drain Plug From Transaxle Housing
Courtesy of SUZUKI OF AMERICA CORP.
Lower vehicle and fill proper amount of an equivalent of DEXRON®-III
Check fluid level by referring to A/T FLUID LEVEL CHECK .
Automatic transaxle fluid

An equivalent of DEXRON®-III

Automatic transaxle fluid capacity

When draining from drain plug hole: 4.5 liters (7.92 / 9.60 US/Imp pt.)

When overhauling: 7.3 liters (12.85 / 15.57 US/Imp pt.)

Fig 2: Identifying Fluid Level Gauge
Courtesy of SUZUKI OF AMERICA CORP.