Tightening Torque Specifications
WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lb-ft | |
| Front brake caliper bleeder plug | 9 | 0.9 | 6.5 |
| Rear brake caliper bleeder plug | 9 | 0.9 | 6.5 |
| Rear wheel cylinder bleeder plug | 8 | 0.8 | 6.0 |
| Flexible hose joint bolt | 23 | 2.3 | 17.0 |
| Master cylinder fixing nut | 18 | 1.8 | 13.0 |
| Brake pipe flare nut for M10 | 16 | 1.6 | 11.5 |
| Brake pipe flare nut for M12 | 19 | 1.9 | 14.0 |
| Booster mounting nut | 13 | 1.3 | 9.5 |
| Clevis pin lock nut | 26 | 2.6 | 19.0 |
NOTE:
The specified tightening torque is also described in the following.
FRONT BRAKE HOSE / PIPE CONSTRUCTION
REAR BRAKE HOSE / PIPE CONSTRUCTION
MASTER CYLINDER AND BRAKE BOOSTER COMPONENTS
FRONT BRAKE HOSE / PIPE CONSTRUCTION
REAR BRAKE HOSE / PIPE CONSTRUCTION
MASTER CYLINDER AND BRAKE BOOSTER COMPONENTS
Reference:
For the tightening torque of fastener not specified in this article, refer to FASTENERS INFORMATION .