Front Disc Brake Pad Inspection
WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
Reference: FRONT DISC BRAKE PAD REMOVAL AND INSTALLATION
Check pad lining for wear. When the wear exceeds limit, replace with new one.
CAUTION:
Never polish pad lining with sandpaper. If lining is polished with sandpaper, hard particles of sandpaper will be deposited in lining and may damage disc. When pad lining requires correction, replace it with a new one.
Brake pad thickness (lining thickness)
Standard: 10 mm (0.39 in.)
Limit: 2 mm (0.08 in.)
NOTE:
When pads are removed, visually inspect caliper for brake fluid leak. Correct leaky point, if any.