Fuel Pipe Removal and Installation: Removal
WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
- Relieve fuel pressure in fuel feed line according to FUEL PRESSURE RELIEF PROCEDURE .
- Disconnect negative (-) cable at battery.
- Disconnect fuel hose (3) from fuel pipe (2) at the front and rear of each fuel pipe referring to FUEL HOSE DISCONNECTING AND RECONNECTING .
- Mark the location of clamps (1) on fuel pipes (2), so that the clamps can be reinstalled to where they were.
- Remove clamps (1) from vehicle body, fuel pipes and brake pipes.CAUTION: Be careful not to bent and damage fuel pipes and brake pipes when removing clamp.
- Remove fuel pipe (2).