Ignition Coil Assembly (Including ignitor) Removal and Installation: Installation

WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Reference: IGNITION COIL ASSEMBLY (INCLUDING IGNITOR) INSPECTION

Install ignition coil assembly (2).
Tighten ignition coil bolts (1) to specified torque, and then connect ignition coil coupler.
Tightening torque

Ignition coil bolt a: 6.5 N.m (0.65 kg-m, 5.0 lb-ft)

Fig 1: Installing Ignition Coil Bolts And Ignition Coil Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Install air cleaner case referring to AIR CLEANER ASSEMBLY REMOVAL AND INSTALLATION .
Connect negative cable to battery.