Standard Tightening Torque
WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
Each fastener should be tightened to the torque specified in each article. If no description or specification is provided, refer to the following TIGHTENING TORQUE CHART for the applicable torque for each fastener. When a fastener of greater strength than the original one is used, however, use the torque specified for the original fastener.
NOTE:
- For the flanged bolt, flanged nut and self-lock nut of 4T and 7T strength, add 10% to the tightening torque given in the following chart.
- The following chart is applicable only where the fastened parts are made of steel light alloy.
Tightening torque chart
TIGHTENING TORQUE CHART
| Strength | Unit | Thread diameter (Nominal diameter) (mm) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4 | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | ||||
| A equivalent of 4T strength fastener | N.m | 1.5 | 3.0 | 5.5 | 13 | 29 | 45 | 65 | 105 | 160 | ||
| kgf-m | 0.15 | 0.30 | 0.55 | 1.3 | 2.9 | 4.5 | 6.5 | 10.5 | 16 | |||
| lb-ft | 1.0 | 2.5 | 4.0 | 9.5 | 21.0 | 32.5 | 47.0 | 76.0 | 116.0 | |||
| A equivalent of 6.8 strength fastener without flange | N.m | 2.4 | 4.7 | 8.4 | 20 | 42 | 80 | 125 | 193 | 280 | ||
| kgf-m | 0.24 | 0.47 | 0.84 | 2.0 | 4.2 | 8.0 | 12.5 | 19.3 | 28 | |||
| lb-ft | 2.0 | 3.5 | 6.0 | 14.5 | 30.5 | 58.0 | 90.5 | 139.5 | 202.5 | |||
| A equivalent of 6.8 strength fastener with flange (1): Self-lock nut (6 strength) |
N.m | 2.4 | 4.9 | 8.8 | 21 | 44 | 84 | 133 | 203 | 298 | ||
| kgf-m | 0.24 | 0.49 | 0.88 | 2.1 | 4.4 | 8.4 | 13.3 | 20.3 | 29.8 | |||
| lb-ft | 2.0 | 3.5 | 6.5 | 15.5 | 32.0 | 61.0 | 96.5 | 147.0 | 215.5 | |||
| A equivalent of 7T strength fastener | N.m | 2.3 | 4.5 | 10 | 23 | 50 | 85 | 135 | 210 | 240 | ||
| kgf-m | 0.23 | 0.45 | 1.0 | 2.3 | 5.0 | 8.5 | 13.5 | 21 | 24 | |||
| lb-ft | 2.0 | 3.5 | 7.5 | 17.0 | 36.5 | 61.5 | 98.0 | 152.0 | 174.0 | |||
| A equivalent of 8.8 strength bolt (8 strength nut) without flange | N.m | 3.1 | 6.3 | 11 | 27 | 56 | 105 | 168 | 258 | 373 | ||
| kgf-m | 0.31 | 0.63 | 1.1 | 2.7 | 5.6 | 10.5 | 16.8 | 25.8 | 37.3 | |||
| lb-ft | 2.5 | 4.5 | 8.0 | 19.5 | 40.5 | 76.0 | 121.5 | 187.0 | 270.0 | |||
| A equivalent of 8.8 strength bolt (8 strength nut) with flange | N.m | 3.2 | 6.5 | 12 | 29 | 59 | 113 | 175 | 270 | 395 | ||
| kgf-m | 0.32 | 0.65 | 1.2 | 2.9 | 5.9 | 11.3 | 17.5 | 27 | 39.5 | |||
| lb-ft | 2.5 | 5.0 | 9.0 | 21.0 | 43.0 | 82.0 | 126.5 | 195.5 | 286.0 | |||
|
||||||||||||