Yaw Rate/G Sensor Assembly Removal and Installation: Installation

WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Reference: YAW RATE/G SENSOR INSPECTION

Before installing yaw rate/G sensor assembly (1), check installing condition as follows.
- Deformations around sensor installation area (2) (in sensor bracket).
- Foreign matters on mating surface between sensor and sensor bracket.
Install yaw rate/G sensor assembly (1) to floor panel.
Tightening torque

Yaw rate/G sensor assembly bolt a: 6.5 N.m (0.65 kg-m, 5.0 lb-ft)

Fig 1: Identifying Yaw Rate/G Sensor Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Connect connector to yaw rate/G sensor assembly.
Install console box, referring to CONSOLE BOX COMPONENTS .
Connect negative (--) cable to battery.