Precautions in Sensor Calibration

WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Steering angle sensor transmits the absolute steering angle value calculated with the steering neutral position (calibration point) required by ESP® control module.

TCS and stability control system use this set of data.

When the following operation is done, calibration should be performed since the original calibration points are deleted.

Power is not supplied to steering angle sensor. (battery and/or fuse is removed.)
Steering angle sensor is replaced.
Power is not supplied to ESP® control module. (battery, fuse and/or connector is removed.)
ESP® hydraulic unit / control module assembly is replaced.

Perform sensor calibration according to SENSOR CALIBRATION .