LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Reno Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (Engine Electrical Devices) >> Repair Instructions >> Knock Sensor Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative cable at battery.
  2. Hoist vehicle.
  3. Remove right side drive shaft referring to FRONT DRIVE SHAFT ASSEMBLY REMOVAL AND INSTALLATION: FRONT .
  4. Disconnect knock sensor connector (1).
  5. Remove knock sensor (2) from cylinder block.
scientia non olet · About LEMON Manuals