Engine Coolant Temperature (ECT) Sensor Removal and Installation: Removal
WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative cable at battery.
- Drain coolant referring to COOLING SYSTEM
.WARNING: To avoid danger of being burned, do not remove radiator cap while engine and radiator are still hot. Scalding fluid and steam can be blown out under pressure if cap is taken off too soon.
- Disconnect connector from ECT sensor (1).
- Remove ECT sensor from water outlet cap.