Torque Converter Housing Disassembly and Assembly

Remove the torque converter bolts.
Hit the torque converter housing lightly.
Remove the torque converter housing.

Fig 1: Identifying Torque Converter Bolts
Courtesy of SUZUKI OF AMERICA CORP.

Tighten:

Tighten the torque converter housing bolts to 15 N.m (11 lb-ft).
- Then, tighten the bolts in the following order.
  (15, 3) - (16, 4) - (14, 5) - (13, 23) - (12, 22) - (11, 21) - (10, 20) - (9, 19) - (8, 18) - (7, 17) - (6) - (1, 2)
- Last, in numerical order, tighten the bolts all the way. (1 - 23)
  Tighten:
  
  Tighten the torque converter housing bolts to 23 N.m (17 lb-ft).
  
  Fig 2: Identifying Torque Converter Housing Bolts Tightening Sequence
  Courtesy of SUZUKI OF AMERICA CORP.
Take out the metal gasket.
Take out the paper gasket.
Remove the oil filter bolt and oil filter.

Fig 3: Removing Oil Filter Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Remove the baffle plate bolts and baffle plate.

Fig 4: Identifying Baffle Plate Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Remove the line pressure measurement plug.
Installation should follow the removal procedure in the reverse order.

Fig 5: Removing Line Pressure Measurement Plug
Courtesy of SUZUKI OF AMERICA CORP.