Shift Linkage Assembly Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the negative battery cable.
Remove the rod clamp. Refer to Shift Linkage Adjustment .
Remove the clip and the bolt from universal joint.
Separate the universal joint from the transaxle.

Fig 1: Identifying Clip And Bolt Of Universal Joint
Courtesy of SUZUKI OF AMERICA CORP.
Remove the fixing shaft pin and separate the linkage connection part from the transaxle rear mounting bracket.
Remove the shift linkage assembly.

Fig 2: Identifying Shift Linkage Assembly
Courtesy of SUZUKI OF AMERICA CORP.