LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Reno Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Air Conditioning System) >> Automatic >> Repair Instructions >> Automatic Temperature Control Assembly Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Automatic Temperature Control Assembly Removal

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the INSTRUMENT CLUSTER TRIM PANEL REMOVAL .
  3. Remove the control assembly retaining screws.
  4. Pull out the unit to gain access to the rear.
  5. Disconnect the electrical connectors.
  6. Remove the air inlet tube.
  7. Remove the automatic temperature control assembly.
    Fig 1: Identifying Automatic Temperature Control Assembly & Retaining Screws
    G04720100Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals