LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Reno Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Fuel System) >> Repair Instructions >> Fuel Pump Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the gasket mating surface on the fuel tank.
  2. Position the new gasket in place.
  3. Install the fuel pump into the fuel tank in the same location as removed for ease of line and connector installation.
    Fig 1: Installing Fuel Pump
    G04719131Courtesy of SUZUKI OF AMERICA CORP.
  4. Position the lock ring in place and turn it clockwise until it contacts the tank stop.
  5. Connect the fuel pump assembly connector.
  6. Install the fuel pump outlet line.
  7. Install the fuel tank return line.
  8. Install the fuel pump access cover.
  9. Connect the negative battery cable.
  10. Perform an operational check of the fuel pump.
  11. Install the rear seat. Refer to REAR SEAT CUSHION INSTALLATION .
scientia non olet · About LEMON Manuals