Scan Tool Data: Notes
WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
SCAN TOOL DATA
| Scan tool data | Vehicle condition | Normal condition / reference values | |
|---|---|---|---|
| Accel pedal Pos | Ignition switch ON after warmed up engine | Accelerator pedal released | 0 - 5% |
| Accelerator pedal depressed fully | 90 - 100% | ||
| Engine speed | At engine idle speed | Engine idle speed is display | |
| 4WD mode | 2WD/4WD switch selected to 2WD position | 2WD | |
| 2WD/4WD switch selected to AUTO position | AUTO | ||
| 2WD/4WD switch selected to LOCK position | LOCK | ||
| ABS operating | ABS mode | ||
| Ignition switch ON and engine stop | Relay off | ||
| Stability control operating | Yaw cont | ||
| ESP® operating | ESP® mode | ||
| 4WD current | Engine running | 0 - 200 mA | |
| Battery voltage | At engine idle speed | 10 - 14 V | |
| Coupling temp | Engine running | -40°C - 100°C (-40°F - 212°F) | |
| Wheel speed (F) | Vehicle stop | 0 km/h, 0 MPH | |
| Wheel speed (R) | Vehicle stop | 0 km/h, 0 MPH | |
| F-R Wheel speed Diff | Vehicle stop | 0 rpm | |
| 4WD duty | Ignition switch ON and 2WD/4WD switch selected to 2WD position | 0% | |