LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Reno Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Automatic Transmission) >> Repair Instructions >> Output Shaft Speed Sensor Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Output Shaft Speed Sensor Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative cable at battery.
  2. Disconnect output shaft speed sensor connector (2).
  3. Remove output shaft speed sensor (1) by removing its bolt.
    Fig 1: Identifying Output Shaft Speed Sensor Connector
    G04847777Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals