A/T Relay Inspection

WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative cable at battery.
Remove A/T relay (1), from fuse box.
Check that there is no continuity between terminal "c" and "d". If there is continuity, replace relay.
Connect battery positive (+) terminal to terminal "b" of relay. Connect battery negative (-) terminal to terminal "a" of relay. Check for continuity between terminal "c" and "d". If there is no continuity when relay is connected to the battery, replace relay.

Fig 1: Checking Continuity Between Terminal "C" & "D"
Courtesy of SUZUKI OF AMERICA CORP.