Electric Throttle Body System Calibration
WARNING: This page is about a different car, the 2007 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the service described under the PRECAUTIONS OF ELECTRIC THROTTLE BODY SYSTEM CALIBRATION
is performed, calibrate electric throttle body system as follows.
- If electric throttle body assembly and/or APP sensor assembly are replaced, perform the following steps.
- Disconnect negative cable at battery for 20 seconds or more for the purpose of clearing calibration data of closed throttle position from memory in ECM.
- Connect negative cable to battery.
- Keep ignition switch at ON position for 5 seconds or more without running engine.