Front Wheel Speed Sensor Removal and Installation: Installation
- Install the front wheel speed sensor to the steering knuckle. Secure it with the bolt.
Tighten:
Tighten the front wheel speed sensor bolt to 8 N.m (71 lb-in).
- Feed the sensor harness into the engine compartment, insert it into the grommet and secure the grommet into the hole in the strut tower.
- Secure the harness into the grommet holders and the clamps under the fender.
- Install the wheel. Refer to WHEEL REMOVAL AND INSTALLATION .
- Lower the vehicle.
- Connect the front wheel speed sensor electrical connector.
- Connect the negative battery cable.