LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Grand Vitara Base, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Air Conditioning System) >> Repair Instructions >> Magnet Clutch Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Magnet Clutch Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove compressor from vehicle referring to COMPRESSOR ASSEMBLY REMOVAL AND INSTALLATION .
  2. Fix armature plate (1) with special tool (A) and remove armature plate bolt.

    Special Tool 

    (A): 09991-06310 

    NOTE: Do not reuse armature plate bolt.
    Fig 1: Removing Armature Plate Bolt
    G05472981Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove armature plate.
  4. Remove shim(s) from shaft.
  5. Using special tool (A), remove snap ring (1).

    Special Tool 

    (A): 09900-06107 

    Fig 2: Removing Snap Ring
    G05472982Courtesy of SUZUKI OF AMERICA CORP.
  6. Remove magnet clutch pulley (1) with puller (2).
    NOTE: Be careful not to damage pulley.
    Fig 3: Removing Magnet Clutch Pulley With Puller
    G05472983Courtesy of SUZUKI OF AMERICA CORP.
  7. Remove snap ring (1) using special tool (B), and then remove magnet clutch coil (1).

    Special Tool 

    (A): 09900-06107 

    Fig 4: Removing Snap Ring
    G05472984Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals