DTC Troubleshooting
DTC TROUBLESHOOTING TABLE
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "A/T System Check" performed? | Go to Step 2. | Go to A/T SYSTEM CHECK . |
| 2 | Check TCC pressure control solenoid valve circuit for ground short
Is continuity indicated? |
TCC pressure control solenoid valve control and ground circuit is shorted to ground. If circuit is OK, go to Step 4. | Go to Step 4. |
| 3 | Check TCC pressure control solenoid valve circuit for open
Is it infinity? |
TCC pressure control solenoid valve control and ground circuit is open. If circuit is OK, go to Step 4. | Go to Step 4. |
| 4 | Inspection TCC pressure control solenoid valve
Is check results satisfactory? |
Intermittent trouble or faulty TCM. Check for intermittent trouble by referring to INTERMITTENT AND POOR CONNECTION INSPECTION . If OK, substitute a known-good TCM and recheck. | Replace TCC pressure control solenoid valve by referring to SOLENOID VALVES (SHIFT SOLENOID-A, SHIFT SOLENOID-B, SHIFT SOLENOID-E, TCC SOLENOID, PRESSURE CONTROL SOLENOID-A, PRESSURE CONTROL SOLENOID-B, AND PRESSURE CONTROL SOLENOID-C) REMOVAL AND INSTALLATION . |