Clutch Master Cylinder Inspection

WARNING: This page is about a different variant/trim than selected.

Check master cylinder (1) for damage and fluid leakage, boot for damage and deterioration, gasket for damage and deterioration.
Check for push rod clevis distance "a" and clevis pin hole diameter "b" as shown.

If any malfunction is found, replace master cylinder.

Push rod clevis distance "a":

106.1 - 107.1 mm (4.18 - 4.22 in.)

Clevis pin hole diameter "b":

10.05 - 10.15 mm (0.396 - 0.399 in.)

Fig 1: Identifying Push Rod Clevis Distance "A" & Clevis Pin Hole Diameter "B"

Courtesy of SUZUKI OF AMERICA CORP.