LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Grand Vitara Base, AWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Air Conditioning System) >> Diagnostic Information and Procedures >> DTC Clearance >> Using SUZUKI Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using SUZUKI Scan Tool

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn OFF ignition switch.
  2. Connect SUZUKI scan tool to data link connector (DLC) (1).

    Special Tool 

    (A): SUZUKI scan tool 

    Fig 1: Connecting Scan Tool To Data Link Connector
    G05472922Courtesy of SUZUKI OF AMERICA CORP.
  3. Turn ON ignition switch.
  4. Erase DTC according to instructions displayed on SUZUKI scan tool. Refer to scan tool operator's manual.
  5. After completing the clearance, turn ignition switch to OFF position and disconnect SUZUKI scan tool from DLC.
  6. Perform DTC CHECK  and confirm if normal DTC (NO CODES) is displayed.
scientia non olet · About LEMON Manuals