DTC Troubleshooting
NOTE:
Before this trouble shooting is performed, read the precautions for DTC troubleshooting by referring to PRECAUTIONS FOR DTC TROUBLESHOOTING .
TROUBLESHOOTING TABLE
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "Engine and Emission Control System Check" performed? | Go to Step 2. | Go to ENGINE AND EMISSION CONTROL SYSTEM CHECK . |
| 2 | Engine start signal check
Does "Starter SW" signal correctly? |
Intermittent trouble. Check for intermittent and poor connection. | Go to Step 3. |
| 3 | Engine start signal check
Is it in good condition? |
Substitute a known good ECM and recheck. | Repair or replace start signal circuit. |