Electric Throttle Body Assembly Removal And Installation: Installation

Reverse removal procedure for installation noting the following.

• Clean mating surfaces and use new throttle body gasket (1).
  Fig 1: Identifying Throttle Body Gasket

  Courtesy of SUZUKI OF AMERICA CORP.
• Use new fuel connector pipe gaskets.
• Tighten fuel connector pipe union bolts and delivery pipe bolts to specified torque referring to FUEL SYSTEM COMPONENTS .
• Use new surge tank pipe gaskets.
• Check to ensure that all removed parts are back in place.

  Reinstall any necessary parts which have not been reinstalled.

• Refill cooling system referring to COOLING SYSTEM FLUSH AND REFILL .
• Upon completion of installation, verify that there is no fuel leakage at each connection according to FUEL LEAKAGE CHECK PROCEDURE .