ABS

ABS Warning Light Check

1. Turn ignition switch ON.
2. Check that ABS warning light (1) comes ON for about 2 seconds and then goes off.
If any faulty condition is found, advance to ABS Warning Light Does Not Come ON at Ignition Switch ON or ABS Warning Light Comes ON Steady.





EBD Warning Light (Brake Warning Light) Check

NOTE: Perform this check on a level place.

1. Turn ignition switch ON with parking brake applied.
2. Check that EBD warning light (brake warning light) (1) is turned ON.
3. Release parking brake with ignition switch ON and check that EBD warning light (brake warning light) goes off.
If it doesn't go off, go to EBD Warning Light (Brake Warning Light) Comes ON Steady.