Front Brake Disc Removal and Installation

Front Brake Disc Removal and Installation

Removal
1. Hoist vehicle and remove front wheel.
2. Remove caliper assembly (2) by loosening caliper carrier bolts (1) (2 pcs).

CAUTION:
During removal, be careful not to damage brake flexible hose and not to depress brake pedal.

NOTE:
Hang removed caliper with a wire hook or the like so as to prevent brake hose from bending and twisting excessively or being pulled.





3. Remove disc by using 8 mm bolts (1) (2 pcs).





Installation
Reference: Front Brake Disc and Pad Inspection
1. Install disc to wheel hub.
2. Install caliper assembly to steering knuckle.
3. Tighten caliper carrier bolts (1) to specification.
Tightening torque
Caliper carrier bolt a: 85 Nm (8.5 kg-m, 61.5 ft. lbs.)





4. Tighten front wheel nuts to specifications.
Tightening torque
Wheel nut a: 100 Nm (10.0 kg-m, 72.5 ft. lbs.)





5. Upon completion of installation, perform brake test.