Rear Door Assembly

Rear Door Lock Assembly Removal and Installation

Reference: Rear Door Lock Assembly Components

Removal
1. Remove rear door trim referring to step 1) to 3) of Rear Door Glass Removal and Installation.
2. Disconnect door lock motor lead wire.




3. Remove door latch mounting screws (1) and remove door latch assembly (2).

Installation

Reference: Rear Door Lock Assembly Inspection




Reverse removal procedure to install rear door lock assembly referring to the following instruction and Front Door Lock Assembly Removal and Installation.

- Tighten door latch screw to specified torque.

Tightening torque
Door latch screw a: 5.0 Nm (0.5 kg-m, 4.0 lb-ft)